Spuhr SP-4022 is replaced by SP-4022C
383.16€ (309.00€ alv 0%)
OBSERVE: SP-4022 replaced by SP-4022C
Article no.: SP-4022
A combination of the extended cantilever of the SP-4026 and the absolute co-witness of the SP-4016. Allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount.
10-degree wedge included
0 MIL/0 MOA
Height: 38 mm/1.5”
Length: 140 mm/5.51”
Weight: 246 g/8.7 oz
The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear planeof the mount body to prevent canting of the rifle. The rings are diagonally cut for increased visibility of the elevation and windage turrets (US Patent 8,733,011).
The mounts are machined from billet 7075 T651 aluminum and all aluminum parts are hardcoat anodized. The Torx 20 ring screws are zinc-nickel coated for corrosion resistance. The screws come pre-waxed from the factory to ensure proper torque values.
The mount is shipped with a manual and a “wedge” leveling key.
The SP-4022 is designed for use on rifles with MIL-STD-1913 or STANAG 4694 rails, and is especially suitable for extended Picatinny rails combined with night vision equipment. The SP-4022 will fit most 34 mm scope tubes except for scopes with extended erector housings, such as the US Optics TPAL/EREK.
|Dimensions||16 × 12 × 8 cm|
Only logged in customers who have purchased this product may leave a review.