Spuhr QDP-7002 Scope Mount Ø40 H38mm/1.5″ 0MIL QDP
481.12€ (388.00€ alv 0%)
Article no.: QDP-7002
Quick detachable mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.
0 MIL/0 MOA
Height: 38 mm/1.5”
Length: 126 mm/4.96” (mount body only)
Weight: 288 g/10.2 oz
Note: Will not fit new style IOR Terminator with stepped tube.
If using with Swarovski dS Gen1, rifle cannot have a tilted Picatinny rail.
10-degree wedge included
Note: Will not fit the SAKO S20 or rifles with 2-piece rails
The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear planeof the mount body to prevent canting of the rifle. The rings are diagonally cut for increased visibility of the elevation and windage turrets (US Patent 8,733,011).
The mounts are machined from billet 7075 T651 aluminum and all aluminum parts are hardcoat anodized. The Torx 20 ring screws are zinc-nickel coated for corrosion resistance. The screws come pre-waxed from the factory to ensure proper torque values. The levers can be adjusted for tension.
The mount is shipped with a manual and a “wedge” leveling key.
The QDP-7002 is a quick detachable version of the SP-7002, designed for use with 56 mm objectives on rifles with MIL-STD-1913 or STANAG 4694 rails, and is especially suitable for extended Picatinny rails combined with night vision equipment. The QDP-7002 will fit most 40 mm scope tubes except for scopes with extended erector housings, such as the US Optics TPAL/EREK.
|Dimensions||16 × 12 × 8 cm|
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.