MDT - LRA S90 Bracket for Send iT MV3 and Spuhr Mounts
MDT - LRA S90 Bracket for Send iT MV3 and Spuhr Mounts - Image 2
MDT - LRA S90 Bracket for Send iT MV3 and Spuhr Mounts - Image 3

MDT – LRA S90 Bracket for Send iT MV3 and Spuhr Mounts

82.83€ (66.00€ alv 0%)

Available on backorder

Email when stock available

SKU: MDT 107203-BLK Categories: , Tags: , ,

Description

MOUNT YOUR LEVEL & TIMER TO SPUHR SCOPE MOUNTS
Vertically mount directly to Spuhr’s SP, SA, SS, and ST models.

INCLUDED<
– MV3 S90 bracket
– 8-32 x3.8FH Screw x1
– M4x0.7-10mm FH screw x2

Some mounts may require Spuhr A-0001: Spacer 4mm. Contact your Spuhr dealer for specific applications.

**Warning** Screw lengths MUST be checked PRIOR to attaching the mounts. In some applications the screw can “bottom out” against the scope tube or damage other components if the screw length is excessive or the wrong size/thread pitch is used. YOU are RESPONSIBLE to check the length and size of screws and verify interferences before final assembly. LRA is not liable for damage to our products or the products they are being mounted or attached to.

Step 1- Attach the LRA S90 to the Spuhr mount using the (2) supplied 4mm x 10mm flat head screws using either an IP20 or T20 Torx Plus or Torx drive. Torque both screws to 20-25 in-lbs.

Step 2- attach the Send iT MV3 to the LRA S90 bracket. Follow the instructions included with the Send iT MV3 for removal of the Picatinny mount (link below). Carefully fit the Send iT into the pocket of the LRA S90 bracket by hand and confirm it’s sitting flat and fully seated BEFORE installing the screw. Install and torque the (1) supplied # 8-32 Flat head screw to 30-34 in-lbs using a 3/32 Allen drive.

SKU:107203-BLK

Additional information

Weight 0.2 kg
Dimensions 10 × 10 × 4 cm

Brand

MDT

A passion for precision & Innovation

MDT was born out of a single purpose: to provide better value and better accuracy for precision rifles. The first MDT chassis was developed from the ground up based on the needs of shooters.

Our engineers verified every function and feature based on the input from competitive shooters. The end results was a game-changing product called the TAC21 that continues to perform at the range, in the field and in competitions around the world.

Today, MDT chassis, magazines and accessories are still developed the same way.

We collaborate, question and verify our concepts with precision shooters from around the globe to ensure that every MDT product is designed with the same single purpose: to provide our customers with the absolute best product possible.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products