Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to an ISMS scope mount. Includes shim plate and screws.

The A-0010I footprint also matches the following, though screw sizing may vary:

• Trijicon RMR
• Trijicon SRO
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T

Height: 9.5 mm/.374″
Weight: 21 g/0.7 oz

Note: Will not fit Hunting Series mounts and rings – use H-0010 instead. Please note that the two pins are designed to be used together with the included shim plate – if the shim plate is left out the pins may bottom out in sight.