Spuhr SP-4011 Scope Mount Ø34 H28mm/1.102” 0MIL PIC
383.16€ (309.00€ alv 0%)
Article no.: SP-4011
“The GAP Mount”
Made on request from George Gardner of GA Precision.
Special mount with extra low height. Due to the low height it will not work with scopes like S&B 5-25 and 3-20, the Kahles k624i, or Vortex Razor as the erector housing will collide with the bridge between the rings. It works fine with Bushnells and S&B 3-12×50 and 4-16×50.
Aside from the low height a special feature of this mount is an extra front clamping screw allowing the SP-4011 to be mounted partly forward – in a cantilever position – on the Picatinny rail of the action.
This is especially useful on AR-type rifles and actions with integrated Picatinny rails like Defiance, Surgeon and Impact, where the rail isn’t sufficiently long for the desired eye-relief with some scopes.
0 MIL/0 MOA
Height: 28 mm/1.102”
Clearance: 5.5 mm/.216″ (from the bottom of the tube to bridge of the mount body)
Length: 121 mm/4.76”
Weight: 231 g/8.1 oz
10-degree wedge included
DISCONTINUED MODEL, not available any more
Out of stock
Email when stock available
Description
Tekninen tiedote: Spuhr sp-4011 Spec_Sheet.pdf
The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent canting of the rifle. The rings are diagonally cut for increased visibility of the elevation and windage turrets (US Patent 8,733,011).
The mounts are machined from billet 7075 T651 aluminum and all aluminum parts are hardcoat anodized. The Torx 20 ring screws are zinc-nickel coated for corrosion resistance. The screws come pre-waxed from the factory to ensure proper torque values.
The mount is shipped with a manual and a “wedge” leveling key.
NOTE:
The SP-4011 is designed for use on rifles with MIL-STD-1913 or STANAG 4694 rails, and is especially suitable for extended Picatinny rails combined with night vision equipment. The SP-4011 will fit most 34 mm scope tubes except for scopes with extended erector housings, such as the US Optics TPAL/EREK.
Designed to be used with Bushnell and S&B 3-12 and 4-16 scopes. Will not work with scopes like
the S&B 5-25 or 3-20, Kahles k624i, US Optics TPAL/EREK or Nightforce BEAST. Suitable for bolt
action rifles with 1-piece Picatinny rails. A 5th clamping screw allows the mount to be mounted in a
slight cantilever position.
Additional information
Weight | 0.3 kg |
---|---|
Dimensions | 16 × 12 × 8 cm |
Brand
Spuhr

Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.